AllMyPrinters

Versies

Elke versie van de app, de agent en de slicer met wat er veranderd is. Vragen of problemen met een versie? Schrijf er direct onder.

Feed
App

AllMyPrinters App 0.9.10

Choose whether your Anycubic printer levels the bed before each print, and the anonymous print-start report now also covers your own slicer and G-code files.

Nieuw

  • Anycubic Kobra S1 and other Anycubic printers in LAN mode: new checkbox “Level the bed before printing” in the print view and when printing a G-code file. The app remembers your choice per printer — handy when you print several plates in a row. Before, the app always asked the printer to level.

Verbeterd

  • The anonymous print-start report (since 0.9.9) now also covers prints sliced with your own slicer and G-code files you print directly, for example from the library. It still only says whether the printer started or which error came up, with printer type, model, firmware and number of colours — no file, address or ID. The switch “Report print starts anonymously” under Settings → Slicer is now alway
App

AllMyPrinters App 0.9.9

An anonymous report after each print start helps us find printers that still cause trouble, and emptied ACE slots no longer show an old spool.

Nieuw

  • After you send a job that our server sliced, the app tells us whether the printer accepted the start or which error came up — only with printer type, model, firmware and number of colours. No file, no address, no serial number, no ID, and nothing is sent when you use your own slicer. You can switch it off under Settings → Slicer → “Report print starts anonymously”.

Opgelost

  • Anycubic ACE: when you take a spool out, the printer keeps reporting the material and colour of the last spool. The app now treats such a slot as empty, so no “ghost spool” shows up there and nothing is booked onto it.
Agent

AllMyPrinters Agent 0.7.4

Same as app 0.9.10: bed levelling before printing can be switched off for Anycubic printers, and the print-start report also covers your own slicer and G-code files (AMP_PING=off turns it off).

Nieuw

  • Anycubic Kobra S1 and other Anycubic printers in LAN mode: new checkbox “Level the bed before printing” in the print view and when printing a G-code file. The app remembers your choice per printer — handy when you print several plates in a row. Before, the app always asked the printer to level.

Verbeterd

  • The anonymous print-start report (since 0.9.9) now also covers prints sliced with your own slicer and G-code files you print directly, for example from the library. It still only says whether the printer started or which error came up, with printer type, model, firmware and number of colours — no file, address or ID. The switch “Report print starts anonymously” under Settings → Slicer is now alway
Agent

AllMyPrinters Agent 0.7.3

Same as app 0.9.9: anonymous print-start report (also off with AMP_PING=off), and emptied ACE slots no longer show an old spool.

Nieuw

  • After you send a job that our server sliced, the app tells us whether the printer accepted the start or which error came up — only with printer type, model, firmware and number of colours. No file, no address, no serial number, no ID, and nothing is sent when you use your own slicer. You can switch it off under Settings → Slicer → “Report print starts anonymously”.

Opgelost

  • Anycubic ACE: when you take a spool out, the printer keeps reporting the material and colour of the last spool. The app now treats such a slot as empty, so no “ghost spool” shows up there and nothing is booked onto it.
App

AllMyPrinters App 0.9.7

A warning when a spool won’t last for a print, and STL and 3MF files open straight from other apps.

Nieuw

  • Before you print, the app checks whether the spool in each slot has enough filament left. If the print needs more (with a 5 g reserve), a note says so, for example “Slot 2: this print needs about 60 g, the spool (Green) only has about 30 g left.” You can still print. In the G-code view the note sits right above the Print button, after slicing it is listed under the preview.
  • Open with AllMyPrinters: STL and 3MF files from your file manager or a browser download now open in the app and go straight to slicing. Before, Android often did not offer the app for these files.

Opgelost

  • If the app was closed when you opened a file with it (G-code as well), the app started without the file. The file now arrives in the print view.
App

AllMyPrinters App 0.9.6

A clear confirmation after writing an NFC tag.

Verbeterd

  • Writing NFC tags: after you tap “Write”, the dialog shows a large NFC symbol until you hold the tag to the phone. Once the tag is written, a green check mark, the linked spool and the tag ID stay on screen until you tap “Done”, and the phone vibrates briefly. The spool then scrolls to its NFC tags and highlights the new one.

Opgelost

  • After a slicer update, the nozzle list in the print view could stay empty for up to 7 days. It now refreshes on the next print.
Agent

AllMyPrinters Agent 0.7.1

The print view warns when a spool won’t last for a print.

Nieuw

  • Same spool check as in app 0.9.7: before printing, a note shows when the spool in a slot has less filament left than the print needs (with a 5 g reserve).
Agent

AllMyPrinters Agent 0.6.2

Small improvements for Home Assistant.

Verbeterd

  • The agent's log is in English.
  • Home Assistant integration 0.2.1: fans that a printer only lets you change during a print show as unavailable while it is idle, instead of an error.
Agent

AllMyPrinters Agent 0.6.1

Camera and model picture in Home Assistant.

Nieuw

  • Each printer's camera is available in Home Assistant and can be added to dashboards. The agent only reads the camera while a dashboard shows it.
  • The model that is printing shows up as a picture in Home Assistant.
Agent

AllMyPrinters Agent 0.6.0

Home Assistant: the agent runs as a Home Assistant app, and the new AllMyPrinters integration brings your printers into Home Assistant.

Nieuw

  • Home Assistant app: install the agent directly in Home Assistant OS. It appears in the sidebar, and Home Assistant offers the integration by itself. Repository: github.com/nolimitek/ha-allmyprinters
  • Home Assistant integration (HACS): printers, slots, filament boxes and spools as entities, with pause, resume, cancel, light, fans and drying for every printer brand the agent supports. Works with the Docker agent too: Settings → Home Assistant shows the address and the key.

Opgelost

  • Notifications for a filament box that stays too humid and for a printer that stops answering were never sent. They work now.
Agent

AllMyPrinters Agent 0.5.7

Writing NFC tags now also works when the app is connected to the agent.

Verbeterd

  • Same NFC confirmation as in app 0.9.6: the result stays on screen after writing, and the spool highlights the new tag.

Opgelost

  • With the app connected to the agent, “Write to tag” stopped with “Please check material and temperatures” and nothing was written. The agent now passes the write to the phone.
  • After a slicer update, the nozzle list in the print view could stay empty for up to 7 days. It now refreshes on the next print.
Home Assistant

AllMyPrinters Home Assistant 0.2.1

Clearer fans.

Verbeterd

  • Fans that a printer only lets you change during a print (Anycubic, Flashforge) show as unavailable while it is idle, instead of an error when you try.
Home Assistant

AllMyPrinters Home Assistant 0.2.0

First version of the AllMyPrinters integration for Home Assistant. Needs AllMyPrinters Agent 0.6.1 or newer.

Nieuw

  • Printers, slots with their spools, all spools, filament boxes and filament usage as entities in Home Assistant, all local.
  • Pause, resume and cancel for every printer brand the agent supports, plus light, fans and filament box drying where the printer allows it.
  • Camera and a picture of the model that is printing, ready for dashboards.
  • Dashboard cards for printer, print job, slots, filament box and spool stock.
  • With the AllMyPrinters Agent app, Home Assistant finds the integration by itself. With the Docker agent, enter its address and the key from Settings → Home Assistant.
  • Install through HACS as a custom repository: github.com/nolimitek/ha-allmyprinters
Slicer

AllMyPrinters Slicer 1.0.7

Nozzle sizes other than 0.4 mm and temperature overrides.

Nieuw

  • Slices with the profile for the chosen nozzle size (0.2 to 0.8 mm, wherever OrcaSlicer has one) and a layer height to match.
  • Nozzle, first-layer and bed temperature from the app override the filament profile for that print.

Opgelost

  • Snapmaker printers used 0.08 mm layers by default, now 0.20 mm.
  • Anycubic Kobra S1 Max with a 0.6 or 0.8 mm nozzle could not be sliced (invalid value in the filament profile).
Slicer

AllMyPrinters Slicer 1.0.6

Prusa MK4S and CORE One slice again.

Opgelost

  • Prusa MK4S, MK4S HF, CORE One, CORE One HF, CORE One L and CORE One L HF failed with “no process profile”. They now use the 0.20mm SPEED profile (HF: the matching HF profile).
App

AllMyPrinters App 0.9.5

Nozzle size and temperature when slicing, NFC tags you can write, print costs with electricity, new warnings.

Nieuw

  • Nozzle size: pick 0.2, 0.6, 0.8 mm and more for your printer under Print → Expert settings → Nozzle and temperature, wherever OrcaSlicer has a profile for it (for example 0.25 to 0.8 mm on the Kobra S1 Max). The layer height follows the nozzle. The app remembers the nozzle per printer.
  • Nozzle, first-layer and bed temperature can be set for one print; empty fields use the filament profile.
  • Write NFC tags: in a spool, “Write to tag” puts material, colour, brand and temperatures in OpenSpool format on an NTAG215/216 and links the tag to the spool. Tags from Bambu Lab or Creality are never written; tags with other data are only overwritten after you confirm.
  • Print costs: enter your electricity price, wear per print hour and the power of each printer under Settings → Print costs. Every print job then shows filament plus running costs, also in the monthly total and the statistics.
  • New notifications (with agent 0.5.6): a spool in a slot is running low or critical, a filament box stays too humid for an hour (limit adjustable), a printer stops answering during a print or for 7 days. Tapping “spool running low” opens that spool.

Opgelost

  • Snapmaker printers (U1, J1, A250/A350, Artisan) sliced with 0.08 mm layers by default; now 0.20 mm.
App

AllMyPrinters App 0.9.3

A direct way to the community, and problem reports land with the team on allmyprinters.com.

Nieuw

  • “Community” under More opens the AllMyPrinters community (questions, bugs, ideas).
  • News: link “All versions and changes” to the release notes.

Verbeterd

  • “Report a problem” now goes to allmyprinters.com and shows a hint to the community for general questions.
App

AllMyPrinters App 0.9.2

Models from 3DSEARCH open as their own page.

Nieuw

  • Tapping a model opens its own page with a back arrow instead of a pop-up. Back takes you to the same spot in the list.
  • Image gallery: swipe through the pictures on your phone, use the arrows or arrow keys on a computer.

Verbeterd

  • On wide screens the model page uses two columns, similar models are shown as a grid.
Agent

AllMyPrinters Agent 0.5.6

Warnings for low spools, humid filament boxes and unreachable printers.

Nieuw

  • The agent now also warns your phone when a spool in a slot is running low or critical, when a filament box stays above the humidity limit for an hour (default 40 %), and when a printer stops answering for 5 minutes during a print or for 7 days. Phones that already had notifications on get these warnings switched on once; you can turn each one off in the app. The app shows them from version 0.9.4.
  • Print costs with electricity and wear (Settings → Print costs) also work when the app is paired with the agent.
  • Print view: nozzle size and temperature for one print (needs AllMyPrinters Slicer 1.0.7).
Agent

AllMyPrinters Agent 0.5.5

The agent now checks in once a day, so we know how many agents are in use.

Nieuw

  • Once a day the agent sends a random ID it creates itself, its version and the processor type (e.g. arm64) to allmyprinters.com. Nothing about your printers, spools, files or network, and the IP address is not stored.
Agent

AllMyPrinters Agent 0.5.2

The model page from the app, now in the agent’s web interface.

Nieuw

  • Models open as their own page with a back arrow, with a swipeable image gallery (arrows on a computer).
Slicer

AllMyPrinters Slicer 1.0.5

Preview images in the G-code for printer displays.

Nieuw

  • Sliced files now contain preview images in the format each printer expects (Anycubic, Creality K1/K2, Snapmaker U1, Elegoo, Prusa, Qidi …), so the display shows what is printing.
App

AllMyPrinters App 0.9.1

See what is printing, and a tidier library.

Nieuw

  • The print card shows a picture of the model while it prints.

Verbeterd

  • Library: a compact “Add files” row, folders in one swipeable row, tags as a drop-down next to sorting.
App

AllMyPrinters App 0.9.0

Notifications on your phone when a print needs you.

Nieuw

  • Notifications when a print finishes, is cancelled, fails, pauses or starts. Needs the AllMyPrinters agent, messages are end-to-end encrypted.
  • News from AllMyPrinters inside the app (More → News). You can turn them off under Settings → Notifications.
Agent

AllMyPrinters Agent 0.5.1

Model picture on the print card, tidier library.

Nieuw

  • The print card shows a picture of the model while it prints.

Verbeterd

  • Library: compact “Add files” row, folders in one row, tags as a drop-down.
Agent

AllMyPrinters Agent 0.5.0

The agent now sends print notifications to your phone.

Nieuw

  • Print finished, cancelled, error, paused or started: the agent notices it and sends a notification to the paired phones. Encrypted on the agent, our server only passes it on.