Choose whether your Anycubic printer levels the bed before each print, and the anonymous print-start report now also covers your own slicer and G-code files.
New
Anycubic Kobra S1 and other Anycubic printers in LAN mode: new checkbox “Level the bed before printing” in the print view and when printing a G-code file. The app remembers your choice per printer — handy when you print several plates in a row. Before, the app always asked the printer to level.
Improved
The anonymous print-start report (since 0.9.9) now also covers prints sliced with your own slicer and G-code files you print directly, for example from the library. It still only says whether the printer started or which error came up, with printer type, model, firmware and number of colours — no file, address or ID. The switch “Report print starts anonymously” under Settings → Slicer is now alway
An anonymous report after each print start helps us find printers that still cause trouble, and emptied ACE slots no longer show an old spool.
New
After you send a job that our server sliced, the app tells us whether the printer accepted the start or which error came up — only with printer type, model, firmware and number of colours. No file, no address, no serial number, no ID, and nothing is sent when you use your own slicer. You can switch it off under Settings → Slicer → “Report print starts anonymously”.
Fixed
Anycubic ACE: when you take a spool out, the printer keeps reporting the material and colour of the last spool. The app now treats such a slot as empty, so no “ghost spool” shows up there and nothing is booked onto it.
Same as app 0.9.10: bed levelling before printing can be switched off for Anycubic printers, and the print-start report also covers your own slicer and G-code files (AMP_PING=off turns it off).
New
Anycubic Kobra S1 and other Anycubic printers in LAN mode: new checkbox “Level the bed before printing” in the print view and when printing a G-code file. The app remembers your choice per printer — handy when you print several plates in a row. Before, the app always asked the printer to level.
Improved
The anonymous print-start report (since 0.9.9) now also covers prints sliced with your own slicer and G-code files you print directly, for example from the library. It still only says whether the printer started or which error came up, with printer type, model, firmware and number of colours — no file, address or ID. The switch “Report print starts anonymously” under Settings → Slicer is now alway
Same as app 0.9.9: anonymous print-start report (also off with AMP_PING=off), and emptied ACE slots no longer show an old spool.
New
After you send a job that our server sliced, the app tells us whether the printer accepted the start or which error came up — only with printer type, model, firmware and number of colours. No file, no address, no serial number, no ID, and nothing is sent when you use your own slicer. You can switch it off under Settings → Slicer → “Report print starts anonymously”.
Fixed
Anycubic ACE: when you take a spool out, the printer keeps reporting the material and colour of the last spool. The app now treats such a slot as empty, so no “ghost spool” shows up there and nothing is booked onto it.
A warning when a spool won’t last for a print, and STL and 3MF files open straight from other apps.
New
Before you print, the app checks whether the spool in each slot has enough filament left. If the print needs more (with a 5 g reserve), a note says so, for example “Slot 2: this print needs about 60 g, the spool (Green) only has about 30 g left.” You can still print. In the G-code view the note sits right above the Print button, after slicing it is listed under the preview.
Open with AllMyPrinters: STL and 3MF files from your file manager or a browser download now open in the app and go straight to slicing. Before, Android often did not offer the app for these files.
Fixed
If the app was closed when you opened a file with it (G-code as well), the app started without the file. The file now arrives in the print view.
Writing NFC tags: after you tap “Write”, the dialog shows a large NFC symbol until you hold the tag to the phone. Once the tag is written, a green check mark, the linked spool and the tag ID stay on screen until you tap “Done”, and the phone vibrates briefly. The spool then scrolls to its NFC tags and highlights the new one.
Fixed
After a slicer update, the nozzle list in the print view could stay empty for up to 7 days. It now refreshes on the next print.
The print view warns when a spool won’t last for a print.
New
Same spool check as in app 0.9.7: before printing, a note shows when the spool in a slot has less filament left than the print needs (with a 5 g reserve).
Home Assistant: the agent runs as a Home Assistant app, and the new AllMyPrinters integration brings your printers into Home Assistant.
New
Home Assistant app: install the agent directly in Home Assistant OS. It appears in the sidebar, and Home Assistant offers the integration by itself. Repository: github.com/nolimitek/ha-allmyprinters
Home Assistant integration (HACS): printers, slots, filament boxes and spools as entities, with pause, resume, cancel, light, fans and drying for every printer brand the agent supports. Works with the Docker agent too: Settings → Home Assistant shows the address and the key.
Fixed
Notifications for a filament box that stays too humid and for a printer that stops answering were never sent. They work now.
Writing NFC tags now also works when the app is connected to the agent.
Improved
Same NFC confirmation as in app 0.9.6: the result stays on screen after writing, and the spool highlights the new tag.
Fixed
With the app connected to the agent, “Write to tag” stopped with “Please check material and temperatures” and nothing was written. The agent now passes the write to the phone.
After a slicer update, the nozzle list in the print view could stay empty for up to 7 days. It now refreshes on the next print.
First version of the AllMyPrinters integration for Home Assistant. Needs AllMyPrinters Agent 0.6.1 or newer.
New
Printers, slots with their spools, all spools, filament boxes and filament usage as entities in Home Assistant, all local.
Pause, resume and cancel for every printer brand the agent supports, plus light, fans and filament box drying where the printer allows it.
Camera and a picture of the model that is printing, ready for dashboards.
Dashboard cards for printer, print job, slots, filament box and spool stock.
With the AllMyPrinters Agent app, Home Assistant finds the integration by itself. With the Docker agent, enter its address and the key from Settings → Home Assistant.
Install through HACS as a custom repository: github.com/nolimitek/ha-allmyprinters
Prusa MK4S, MK4S HF, CORE One, CORE One HF, CORE One L and CORE One L HF failed with “no process profile”. They now use the 0.20mm SPEED profile (HF: the matching HF profile).
Nozzle size and temperature when slicing, NFC tags you can write, print costs with electricity, new warnings.
New
Nozzle size: pick 0.2, 0.6, 0.8 mm and more for your printer under Print → Expert settings → Nozzle and temperature, wherever OrcaSlicer has a profile for it (for example 0.25 to 0.8 mm on the Kobra S1 Max). The layer height follows the nozzle. The app remembers the nozzle per printer.
Nozzle, first-layer and bed temperature can be set for one print; empty fields use the filament profile.
Write NFC tags: in a spool, “Write to tag” puts material, colour, brand and temperatures in OpenSpool format on an NTAG215/216 and links the tag to the spool. Tags from Bambu Lab or Creality are never written; tags with other data are only overwritten after you confirm.
Print costs: enter your electricity price, wear per print hour and the power of each printer under Settings → Print costs. Every print job then shows filament plus running costs, also in the monthly total and the statistics.
New notifications (with agent 0.5.6): a spool in a slot is running low or critical, a filament box stays too humid for an hour (limit adjustable), a printer stops answering during a print or for 7 days. Tapping “spool running low” opens that spool.
Fixed
Snapmaker printers (U1, J1, A250/A350, Artisan) sliced with 0.08 mm layers by default; now 0.20 mm.
Warnings for low spools, humid filament boxes and unreachable printers.
New
The agent now also warns your phone when a spool in a slot is running low or critical, when a filament box stays above the humidity limit for an hour (default 40 %), and when a printer stops answering for 5 minutes during a print or for 7 days. Phones that already had notifications on get these warnings switched on once; you can turn each one off in the app. The app shows them from version 0.9.4.
Print costs with electricity and wear (Settings → Print costs) also work when the app is paired with the agent.
Print view: nozzle size and temperature for one print (needs AllMyPrinters Slicer 1.0.7).
The agent now checks in once a day, so we know how many agents are in use.
New
Once a day the agent sends a random ID it creates itself, its version and the processor type (e.g. arm64) to allmyprinters.com. Nothing about your printers, spools, files or network, and the IP address is not stored.
Preview images in the G-code for printer displays.
New
Sliced files now contain preview images in the format each printer expects (Anycubic, Creality K1/K2, Snapmaker U1, Elegoo, Prusa, Qidi …), so the display shows what is printing.
The agent now sends print notifications to your phone.
New
Print finished, cancelled, error, paused or started: the agent notices it and sends a notification to the paired phones. Encrypted on the agent, our server only passes it on.