Same as app 0.9.10: bed levelling before printing can be switched off for Anycubic printers, and the print-start report also covers your own slicer and G-code files (AMP_PING=off turns it off).
Nouveau
- Anycubic Kobra S1 and other Anycubic printers in LAN mode: new checkbox “Level the bed before printing” in the print view and when printing a G-code file. The app remembers your choice per printer — handy when you print several plates in a row. Before, the app always asked the printer to level.
Amélioré
- The anonymous print-start report (since 0.9.9) now also covers prints sliced with your own slicer and G-code files you print directly, for example from the library. It still only says whether the printer started or which error came up, with printer type, model, firmware and number of colours — no file, address or ID. The switch “Report print starts anonymously” under Settings → Slicer is now alway
Same as app 0.9.9: anonymous print-start report (also off with AMP_PING=off), and emptied ACE slots no longer show an old spool.
Nouveau
- After you send a job that our server sliced, the app tells us whether the printer accepted the start or which error came up — only with printer type, model, firmware and number of colours. No file, no address, no serial number, no ID, and nothing is sent when you use your own slicer. You can switch it off under Settings → Slicer → “Report print starts anonymously”.
Corrigé
- Anycubic ACE: when you take a spool out, the printer keeps reporting the material and colour of the last spool. The app now treats such a slot as empty, so no “ghost spool” shows up there and nothing is booked onto it.
The print view warns when a spool won’t last for a print.
Nouveau
- Same spool check as in app 0.9.7: before printing, a note shows when the spool in a slot has less filament left than the print needs (with a 5 g reserve).
Small improvements for Home Assistant.
Amélioré
- The agent's log is in English.
- Home Assistant integration 0.2.1: fans that a printer only lets you change during a print show as unavailable while it is idle, instead of an error.
Camera and model picture in Home Assistant.
Nouveau
- Each printer's camera is available in Home Assistant and can be added to dashboards. The agent only reads the camera while a dashboard shows it.
- The model that is printing shows up as a picture in Home Assistant.
Home Assistant: the agent runs as a Home Assistant app, and the new AllMyPrinters integration brings your printers into Home Assistant.
Nouveau
- Home Assistant app: install the agent directly in Home Assistant OS. It appears in the sidebar, and Home Assistant offers the integration by itself. Repository: github.com/nolimitek/ha-allmyprinters
- Home Assistant integration (HACS): printers, slots, filament boxes and spools as entities, with pause, resume, cancel, light, fans and drying for every printer brand the agent supports. Works with the Docker agent too: Settings → Home Assistant shows the address and the key.
Corrigé
- Notifications for a filament box that stays too humid and for a printer that stops answering were never sent. They work now.
Writing NFC tags now also works when the app is connected to the agent.
Amélioré
- Same NFC confirmation as in app 0.9.6: the result stays on screen after writing, and the spool highlights the new tag.
Corrigé
- With the app connected to the agent, “Write to tag” stopped with “Please check material and temperatures” and nothing was written. The agent now passes the write to the phone.
- After a slicer update, the nozzle list in the print view could stay empty for up to 7 days. It now refreshes on the next print.
Warnings for low spools, humid filament boxes and unreachable printers.
Nouveau
- The agent now also warns your phone when a spool in a slot is running low or critical, when a filament box stays above the humidity limit for an hour (default 40 %), and when a printer stops answering for 5 minutes during a print or for 7 days. Phones that already had notifications on get these warnings switched on once; you can turn each one off in the app. The app shows them from version 0.9.4.
- Print costs with electricity and wear (Settings → Print costs) also work when the app is paired with the agent.
- Print view: nozzle size and temperature for one print (needs AllMyPrinters Slicer 1.0.7).
The agent now checks in once a day, so we know how many agents are in use.
Nouveau
- Once a day the agent sends a random ID it creates itself, its version and the processor type (e.g. arm64) to allmyprinters.com. Nothing about your printers, spools, files or network, and the IP address is not stored.
The model page from the app, now in the agent’s web interface.
Nouveau
- Models open as their own page with a back arrow, with a swipeable image gallery (arrows on a computer).
Model picture on the print card, tidier library.
Nouveau
- The print card shows a picture of the model while it prints.
Amélioré
- Library: compact “Add files” row, folders in one row, tags as a drop-down.
The agent now sends print notifications to your phone.
Nouveau
- Print finished, cancelled, error, paused or started: the agent notices it and sends a notification to the paired phones. Encrypted on the agent, our server only passes it on.